Welcome to Shandong Jingbo Group Co., Ltd.

Tel:+86-13854001787丨E-Mail:sales@jingboglassbottle.cn

Shandong Jingbo Group Co., Ltd.
Shandong Jingbo Group Co., Ltd.
Shandong Jingbo Group Co., Ltd.
Shandong Jingbo Group Co., Ltd.
Shandong Jingbo Group Co., Ltd.

2

1

Some common defects of glass bottles in production

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2019-12-09 16:17
  • Views:

(Summary description)wine bottle manufacturers

Some common defects of glass bottles in production

(Summary description)wine bottle manufacturers

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2019-12-09 16:17
  • Views:
Information
Glass bottles occupy the mainstream position in the packaging industry. These are all well-known facts. Glass bottles have always been loved by people, but there are often some defects in the production of glass bottles. Such defects will cause problems in the quality of glass bottles. What should be paid attention to in the production of glass bottles in order to avoid these defects? Next, we will give you a brief introduction of some common defects and ways to avoid this situation.
 
The main reason for the uneven thickness of the glass bottle is that the temperature of the glass drops is uneven. Generally, the viscosity of the part of the temperature is small, and it is easy to thin, while the resistance is relatively large at the place with low temperature, so it is relatively thick. This phenomenon is also caused by the use of different mold temperature, resulting in uneven thickness of glass bottles. Therefore, in the process of producing glass bottles, we should pay attention to the temperature to avoid uneven thickness of glass bottles.
 
The bottom of the glass bottle is deformed. In general, the glass bottle just produced is not completely shaped, which is easy to cause the deformation of the glass bottle staying. During the transmission, the traces on the conveyor belt will also be printed on the bottom to make the bottom of the glass deformed. This will cause irregular patterns and instability at the bottom of the glass. In order to prevent this situation, it is necessary to wait until the glass temperature drops and is finalized before taking it out, so as to ensure that the bottom of the glass bottle will not deform.
 
Sometimes there are cracks on the bottle body. Cracks are the most common defects. Some of the fine lines are very fine, which can only be found in a specific environment. Cracks will appear at the bottle mouth, bottle neck, bottle body, flat bottom, etc. during production, attention must be paid to these details to better avoid cracks.
Keyword:

Scan the QR code to read on your phone